First, maintenance

Organic fertilizer hydraulic compost tturning machine should be maintained frequently, and the lubrication parts should be refueled regularly. The machine should check the operation of each component at any time during operation, and deal with any abnormality in time.

Second, check and adjust

The chain tightness of the driving device must be checked and adjusted frequently, the chain should be tightened in time if it is too loose, and the chain tension force should not be too large to prevent increasing power and wear.

Three, anti-corrosion

Corrosion is one of the important causes of machine damage, and measures must be taken to prevent it. Special attention should be paid to the anti-corrosion of machinery, and the following measures can be taken:

1. Surface coating: electroplating or spraying on the surface of the organic fertilizer hydraulic compost turning machine can not only increase the corrosion resistance, but also improve the appearance quality.

2. The use of phosphating treatment: this is a chemical treatment, which can improve the anti-corrosion ability, but also increase the wear resistance and light resistance of the product.

3. Change the material properties: use the correct method to process organic fertilizer raw materials, so that their properties are stable and not easy to produce corrosion reaction.

4. Stainless steel material: The important part of the organic fertilizer hydraulic trough flipping machine is made of stainless steel, which can effectively prevent corrosion.

4. Remove accumulated material

The organic fertilizer hydraulic trough turning machine should regularly remove the caking materials and impurities at the bottom to prevent the accumulation of materials from affecting the operation of materials and equipment wear.

5. Safe operation

The operator of organic fertilizer equipment must be professionally trained and familiar with the operation specifications and safety precautions of the machine. Safety operation procedures must be strictly observed during operation, and overload operation is strictly prohibited. When the machine fails, it should be stopped immediately and informed of professional maintenance.