The proper installation method of an organic fertilizer production line involves several steps, and here are some key points:

1. Foundation inspection and preparation: Before installation, check whether the dimensions of each installation foundation meet the requirements of the drawings according to the plan and foundation drawing of the organic fertilizer production equipment. If there are any differences, repairs are carried out until the dimensions are correct.

2. Equipment transportation and acceptance: Organic fertilizer equipment may be deformed, damaged or lost during transportation, so before installation, inspection and acceptance should be carried out according to the equipment list, and corresponding measures should be taken to make each equipment in good condition.

3. Installation sequence: The installation sequence is usually from top to bottom. The host equipment and rack are first installed, and then all connecting pipes and electrical equipment are installed.

4. Inspection of rotating parts: After installation, each rotating part of the organic fertilizer production equipment must be rotated flexibly, without jamming, collision, and percussion. The connecting parts must be firm and sealed, without powder leakage, air leakage, oil leakage and other phenomena.

5. No-load test run: After all equipment is installed, each single machine should be no-load test run, and can be put into load test run after normal operation.

6. Load trial operation: Before the load trial operation, the electronic batching scale and packaging scale are calibrated to achieve the specified accuracy. Load operation for 8 hours, no fault before delivery to the factory for production and use.

7. Operator training: organic fertilizer equipment manufacturers usually provide users with operation and maintenance training to ensure that users can master the operation methods, daily maintenance and troubleshooting skills of the equipment.

Following these steps ensures the correct installation of the organic fertilizer production line and provides stable and reliable equipment support for subsequent production activities.