1. Preparations: Before operating the hydraulic compost turning machine, ensure that the organic fertilizer equipment has been correctly installed, the power cables are connected, and the hydraulic oil is sufficient. Check whether all components are in good condition.

2. Boot: Turn on the power switch, start the hydraulic pump, and check whether the pump runs normally.

3. Adjust parameters: According to the material and compost requirements, adjust the tipping Angle, speed and other parameters of the tipping machine.

4. Load the material: pour the material into the hydraulic tank, pay attention to control the height of the material, avoid too high or too low.

5. Start the pile turning: Start the pile turning machine, and the hydraulic trough pile turning machine starts to work. During the process of overturning, pay attention to the material overturning situation, and adjust the parameters in time if there is an anomaly.

6. Stop flipping: When the expected flipping effect is achieved or it needs to be paused, press the stop button and the hydraulic trough flipping machine will stop working.

7. Power off: After confirming that the device stops running, turn off the power switch to cut off the power supply.

8. Cleaning and maintenance: After the operation is completed, clean the residual materials of the hydraulic trough stacker, check and maintain the equipment regularly to ensure the normal operation of the equipment.

Please note that the above steps are for reference only, and the specific operations should be carried out according to the equipment manual.