Controlling the feed speed of organic fertilizer granulator is one of the key factors to ensure production efficiency and product quality. Here are some effective control methods and tips:

1. Adjust the feeding device: Use a suitable feeding device, such as a screw conveyor or a vibrating feeder, to ensure that the material can continue to enter the pelletizer. According to the production capacity and material characteristics of the organic fertilizer equipment, the feed amount can be precisely controlled by adjusting the speed or vibration frequency of the feeding device.

2. Match the operation parameters of the equipment: the feed speed needs to be matched with the speed and inclination of the disk granulator to avoid overload or material cut-off. Adjust the feed speed according to the Angle of the disc to ensure that the material stays on the disc and the rolling track is suitable.

3. Real-time monitoring and adjustment: Check the shape and size of particles and the flow of materials in the disk through the observation window, and fine-tune the feeding speed according to the actual situation. Sample the strength, water content and particle size distribution of the particles regularly, and gradually adjust the feed speed according to the test results.

4. Stabilize material characteristics and control material humidity: keep the humidity of raw materials in the appropriate range, generally 12%-18%, too wet or too dry will affect the granulation effect. Ensure that the particle size of the material entering the granulator is uniform, generally controlled between 2-5 mm, and can be pre-screened or crushed.

5. Automatic control system, using automatic control: the use of PLC control system, to achieve automatic control of feed speed, real-time adjustment of feed amount according to equipment operating parameters.

Through the above methods, the feed speed of the organic fertilizer granulator can be effectively controlled, and the production efficiency and product quality can be improved.