To make the straw crusher run efficiently, you can start from the following aspects:

1. Preparation before operation: before starting, carefully check whether the equipment is installed in place, check whether the installation is not strong, ensure that the motor shaft and the crusher shaft are parallel, and the tightness of the transmission belt is appropriate. After starting, idling for 2 to 3 minutes, confirm that there is no abnormal phenomenon before feeding. Carefully check the materials to prevent metal, stone and other hard objects from entering the crushing chamber and causing accidents.

2. Precautions in the operation process: the feeding should be uniform, avoid being too fast or too slow, so as not to affect the crushing effect. If it is found that there is noise, bearing and body temperature is too high or spray material, it should be stopped immediately for inspection and troubleshooting. When feeding, the staff should stand on the side of the straw crusher to prevent the debris from bouncing out. Do not grip the long stalk too tightly to prevent the hand from being brought in.

3. Maintenance after operation: Stop feeding before shutdown, wait for the material in the machine to be cleared, and then cut off the power to stop. Cleaning and maintenance should be carried out after shutdown.

4. Daily maintenance and inspection: After each use, dust, straw debris and other debris outside the organic fertilizer equipment should be cleaned. Clean the grinding room regularly and remove the straw residue remaining in the grinding room. Check blade wear regularly and replace blade if necessary. Check the lubrication of bearings regularly, and use lubricating oil maintenance.

Through the above measures, the operation efficiency of the straw crusher can be effectively improved, the service life of the organic fertilizer production line can be extended, and the safety of the operation process can be ensured.