When replacing the lubricating oil of organic fertilizer equipment, you need to pay attention to the following points:

1. Choose the right lubricating oil: according to the requirements of the equipment manual, choose the right lubricating oil grade and viscosity grade. Ensure that the quality of lubricating oil is reliable, and purchase from regular manufacturers to avoid the use of inferior oil products.

2. Pay attention to the timing of oil change: Replace the lubricating oil regularly according to the frequency and operation of the organic fertilizer production line. Oil changes are usually recommended every 500 hours or half a year. If the lubricating oil is found to be black, thickened or contain impurities, it should be replaced in time.

3. Cut off the power and hang a warning sign: Before changing the oil, you must cut off the power of all the electrical controllers of the equipment. Hang a warning sign with the words "under maintenance, do not start" next to the equipment to remind the operator and other staff to pay attention.

4. Thorough cleaning and inspection: In the process of oil change, the lubrication system of the equipment should be thoroughly cleaned to remove old oil and impurities. Check the oil system: check whether the oil system is normal and whether there is oil leakage. Ensure that all components of the device are securely installed to prevent loose or faulty components during operation.

5. Professional operation: The oil change work of organic fertilizer equipment should be operated by professional personnel, who are familiar with the structure and operation principle of the equipment, and can accurately judge the condition of the lubricating oil and equipment problems.

Through the above steps, you can ensure that the lubricating oil replacement work of organic fertilizer equipment is safe and efficient, extend the service life of the equipment, and improve production efficiency.