Your current location: Home > Industry Info
Industry Info

Advantages of extrusion granulator production line

  The extrusion granulation method is a granulation process in which the material is directly extruded into a finished product. The extrusion granulator has a flat die extrusion granulator, a ring die granulator, and a roller press granulator. Let us look at the advantages of the extrusion granulation line.

1. Organic fertilizer granulator machine is suitable for use with organic fertilizer raw materials, livestock manure, manure and urine, heap fertilizer, green manure, sea fertilizer, cake fertilizer, grass charcoal, soil fertilizer, three wastes, microbial and other cities. The special natures of domestic garbage organic fermenting granulation, the particles are irregular spherulites. The qualified granulation rate of the machine is up to 80-90%, adapting to many different formulations. The compressive strength of organic fertilizer is higher than that of disc and drum. The large ball rate is lower than 15%. The uniformity of particle size can be passed according to user requirements. The stepless speed regulation function of this machine is adjusted. The machine is most suitable for direct granulation after fermentation of organic fertilizer, saving the drying process and greatly reducing the manufacturing cost.

2. High-strength wear-resistant hard alloy chain plate with synchronous speed in the pulverization process, the inlet and outlet ports are designed reasonably, the crushed materials are uniform, and it is not easy to stick to the wall, which is easy to clean. The flat-die organic fertilizer granulator is a kind of granulator. It is used to granulate various organic substances after fermentation, and breaks through the conventional organic fertilizer manufacturing process. It is not necessary to dry and pulverize the raw materials before granulation. It can process spherical particles and save a lot of energy. The compound fertilizer crusher effectively solves the problem that the composite fertilizer raw material is easy to absorb moisture and agglomerate, so that the next extrusion granulation is more convenient.

3. The required raw materials do not need any additives, the dry powder can be directly extruded and granulated; the particle strength and particle size can be adjusted, and the strength of the finished granules can be controlled by adjusting the distance to the rolls and replacing the pair of rolls; The friction coefficient of the pair of rolls is small, and it can be recycled to achieve continuous production; high output of finished products, low temperature rise, no drying process, granulation at normal temperature, one-time forming; complete equipment, reasonable layout, advanced technology, low energy consumption, environmental protection,no pollution.